How to use the information
on the Load Control Web site
All devices
that are connected to load control are controlled by addressable relays. The
relay address has three parts: Area Code (AC), Load Group (LG),
and Double Order (DO).
To find the
address for your devices, first check your ripple control box for a label that
provides you with this information. If
your control box is not labeled call your cooperative, during business hours,
and ask for the Load Group and Double Order of each of your controllable
devices.
Current State of LM System
This page
shows the current state of the Load Control System. To check on the current state of your device, go across the Load
Group row until it meets the Double Order column. If the word OFF is there, that device is currently controlled and the
power to it is off. If the word ON is
there, the device is not being controlled.
Last 30 Hours of Control
This page
shows the last 30 hours of control on the system. If the word OFF is on
a line, that line provides the time that a device with that address was turned
off. If the word ON is on
a line, that line provides the time that a device with that address was turned
on. If the area code on a line is 00
(AC00), that means all area codes for that Load Group and Double Order were
controlled.
Last Switching Cycle
This page
shows the last time a device was switched and its current state.